Before buying our condo I had never painted any of the places I had rented.  The only thing I remember painting was a fake wall my roommate and I had (frat boys) put up in the living room of our one bedroom apartment to make it into a two bedroom.  Funny thing about that, my friend and I only painted the part of the wall that wasn’t covered by the couch … can you say college standards?! :)

My husband on the other hand has painted before and was good about giving me tips.  He said to only put about an inch of paint into the pan and to make sure the whole roller has paint on it before painting the wall.  Then there was the tip to roll slowly at first to avoid excess paint spraying on things not covered or taped.  These were all great tips!  The one thing neither of us knew was what kind of paint finish is suggested for different rooms.

The counter top in the bathroom has green tones to it so I knew I wanted to go with a green paint in the guest bathroom.  Here’s the first green we considered, but it was too bright for the bathroom:

After slapping two more greens up on the wall there was a clear winner.  I seemed to have missed taking a picture of the other two colors we put on the wall.  We decided on Benjamin Moore Old Prairie (2143-50).  A whole gallon wasn’t necessary for a small bathroom so I was to buy a half gallon (two quarts really since a half gallon wasn’t an option at this particular store).  The first Saturday after becoming homeowners my husband was busy taping and prepping the condo to be painted.  Therefore I was on go to the store/run errands duty. Off I went to the store feeling really good about what I needed to buy.

The man at the store was less than helpful. He started by trying to up-sell me and I got completely confused on what I needed/wanted.  Eventually he took my order for the paint and then asked what finish I wanted. I said “ummmm well ….” to which he handed me a finish card to look at. I immediately remembered my friend saying samples come in flat, but get eggshell when you actually paint.  Done and done, paint mixed and purchased.

While I was gone my husband taped the bathroom and got it ready to be painted.

When I got home we painted the bathroom our new light green color.  On my next trip that same day to the same paint store to buy paint for the master bedroom, I overheard someone talking about which finish to use for the different rooms.  Keep in mind this information wasn’t on the finish card and the guy helping me didn’t offer up any narrative as to what finish to use.  As I hear the words bathroom and semi-gloss in the same sentence I start to freak out.  Have we just painted the bathroom the with the wrong finish??

When I got back to the new place I shared this tidbit with my husband. Out comes the iphone and Googling begins. Sure enough we painted the bathroom with the wrong finish.  We debated if we should spend the money and the time to repaint the bathroom the same color but in semi-gloss or just go with what we already had on the wall.

In the end back to the paint store we went to purchase a quart of the semi-gloss.  Apparently even a 1/2 gallon was too much paint for the guest bathroom.  Since the bathroom was still taped we decided it was best to repaint the room now.  Doing it right now would save us the hassle of repainting the room in 6 months if the eggshell wasn’t holding up well.

The repainting took less time since there was already a base coat on the walls.  In the end I actually liked the look of the semi-gloss better than the eggshell in the bathroom.  I’m SOOO glad we took the time (and money) to correct the painting finish error.

The husband did a great job on the taping and when we pulled the tap off the lines looked fantastic!

Interested in learning about what paint finish is suggested for each room? Click here for details about paint finishes. This website would have come in handy if we had done some research before slapping paint up on the wall!!  Lesson learned. :)

Guest bathroom painting completed … master bedroom, master bathroom and living/dining room as well as hallways to go.  Painting is time consuming, but the place is starting to have a more homey feel to it!!  Now we just need a shower curtain, mat and accessories and the guest bath will be complete.

Happy painting!

Have you had any similar painting mishaps?

Don’t forget to leave your tidbit by commenting below :)

Share

After making our wedding invitations, calligraphy envelopes and then rehearsal dinner invitations oh and the escort cards I figured why not make the menu cards as well?!?!

We went back and forth about having 2 menu cards per table or a a menu card for each guest.  In the end since the cost difference was minimal we decided to go for a menu card for each guest.

DIY Wedding Menu Cards | Life's Tidbits

What you need:

Paper cutter, Printer/Ink, Card Stock and Photoshop or MS Word

Menu cards are one of those things you can do ahead of time, but no too far ahead. It’s important to have had the tasting and finalized the WHOLE menu.  If the menu isn’t finalized then some reprinting might be in your future.  When using PhotoShop my suggestion is to paste the menu text into MS Word first so everything is spelled correctly.  Even with my husband and I both double checking the menu card we missed a spelling mistake and had to reprint a number of menus. :(  Thank goodness one of the bridesmaids caught the mistake!  Oh and don’t forget to figure out approximately how many menu cards are needed. I made a few extras just incase.  The extra menus weren’t used, but it was nice to have a “clean” one for the wedding scap book!

Menus come in all shapes and sizes.  An important thing to consider when deciding on a size is will it be big enough to fit all the text.  We had three entree choices (fish, chicken and vege), which took up a lot of room on the card.  I went with long thin menu cards – 3.5 by 11.  Partly this was because of the text length, but honestly it made for easy paper cutting as well … one cut and done.

For the wedding and rehearsal dinner invitations I did the paper cutting after the printing. For the menus I cut the paper first and then did the printing.

I didn’t really have a menu “inspiration” card, however I did reference the menu cards of weddings I had previously been to. I decided I wanted a small image/graphic at the top and then the rest of the card to have a clean look. To tie the menu card in with the rest of the wedding paper items I re-used (FREE!) fonts: Mutlu Ornamental and Adobe Pro – from the Wedding Invitations and Allegro – from the DIY Calligraphy Envelopes.

We also used the same type of paper from the wedding/rehearsal dinner invitations, but in a different color – light purple!  The light purple looked great with the gold table clothes and sterling silver roses on each of the tables.  Here’s how they looked:

Photo credit: Korie Lynn Photography

I went back and forth on rounding the edges of the menu, but in the end my mother and husband liked the non-rounded look better.

My tips are pretty much consistent with other printing related projects I’ve blogged about:

  • Print on High Resolution
  • Spell check!
  • Print tests on white paper before doing a test on your nice card stock.  White paper is far less expensive!
  • Don’t wait to the last minute.

Happy DIY and Wedding Planning!!

Did you make your own menus? Any tidbits for other brides you can share?

Don’t forget to leave your tidbit by commenting below! :)

Share

I know I am a bad blogger and I still haven’t told you about how we made our own wedding invitations, but that DIY project was a HUGE undertaking. Honestly, I’m not completely sure how to walk you through the process step by step … YET.  So instead I started thinking maybe I would just begin by sharing our DIY rehearsal dinner invitations.

After determining the location, invite list and all that fun stuff for the rehearsal dinner I decided we (the husband and I) should DIY own rehearsal dinner invites.  We had left over card stock from the wedding invite inserts as well as extra envelopes (from our DIY Calligraphy).  I mean it would have been such a waste not to take advantage of the left over paper materials, right?!?!?! ;)

Early on I found Wedding Paper Divas. They have fabulous invitations for various occasions, in fact it is the website we purchased our save the dates from.  I quickly found this rehearsal invitation, which served as my inspiration for our DIY invites.

Image Credit: Wedding Paper Divas

What you need:

Photoshop has a 30 day FREE trail you can download.  We used a 30 day trial to create the initial draft of our wedding invitations. In the end we ended up purchasing Photoshop.  We planned to use it not only for wedding stuff, but also for my budding photography hobby!  If you plan to go the 30 day trial route, make sure to save the final version of your invitation as a PSD, JPG and TIFF file. This will ensure you are able to print the design even after your trail expires.

To ensure we could use some of our left over envelopes, I knew the invitations would need to be 5×7.  Once I had the size I found a free image online of a chandelier and downloaded it. From there I Googled rehearsal dinner text and placed it on the initial version of the invite.  After that it was just a matter of finding a layout we liked as well as fonts.

The majority of the text is in a renaissance font, which is free to download!  Then for our names I used the same font we used on our invitations for our names, again a free font you can download.  I felt using a little of the same font as the wedding invitations tied everything together.

I didn’t take a lot of pictures of the process, which is a bummer, so I can only really describe what I did.  I printed two invites on each piece of card stock and then used my handy dandy paper cutter to make them 5×7. I printed a number of test versions on plain paper before using the card stock.

This is one of the test versions, please excuse the crappy blackberry camera shot:

I had printed almost all of the rehearsal dinner invites when I remembered I had purchased a paper rounder punch. I decided to go ahead and use one of my test invites and round the corners to see how it looked.  I ended up loving it and the husband was in agreement.  A bunch of punches later we had rounded edges instead of sharp corners.

Here’s what the rehearsal dinner invitation looked like totally finished:

Here are a couple of extra tips:

  1. SPELL CHECK!
  2. Print test versions on plain white paper before doing a sample on your nice card stock.
  3. Print using High resolution.
  4. Make sure you have enough paper.  You will need extra for test prints as well as if you detect a mistake. Or if like me your ink cartridge starts to die so some invites are better than others.
  5. Start early.  Even though you don’t have to print as many rehearsal dinner invitations as wedding invites (usually) they still take time.  Better not to be up against a deadline.

Happy Planning!

Don’t forget to leave your tidbit by commenting below :)

Share

That was the BIG questions!

I became slightly obsessed with the whole DIY thing for the wedding and wanted to make my own wedding programs.  And not any programs, but FAN programs that looked like so:

Photo from http://cherishpaperie.com/faq/programs

I honestly thought getting married in August with a courtyard ceremony meant everyone would be sweating to death while we walked down the aisle and said our vows.  Little did I know it would torrential down pour that day and the beautiful courtyard ceremony I had pictured in my head would never happen.  Oh poor me … I mean getting married in a beautiful hotel really is the pits, isn’t it?!?! wink wink!  Here we are running from the white house back to the hotel as the rain clouds took over the sky.  So glad we got a few pics at the white house in between the rain!!

Photo Credit: Korie Lynn Photography

Okay so enough about my non-courtyard ceremony and back to the wedding programs.  My mother was a bigger fan of these fan programs because of the embossing:

Photo from fan-wedding-programs.com

We honestly went back and forth SO many times about what the programs should look like.  My husband pretty much drew the line at another DIY project.  He thought making our wedding invitations was enough.  Not to mention the DIY escort cards, rehearsal dinner invites and menu cards.  With another DIY project out the husband said whatever made me happy would make him happy for the programs.  My mother and I went back and forth a number of times.

It soon came to the point where no matter where I ordered the wedding programs from I was going to have to pay for rushed shipping.  Most of them were set to arrive with standard shipping the Friday before our wedding.  Clearly that was just WAY too close to the wedding to chance it.  I finally found these:

Photo from beau-coup

The husband was on board, so was my mom and the MOH (my sister)! Win, win, win!! With everyone in agreements I ordered the programs immediately.  Luckily it arrived without any incorrect spelling!!  I’m not going to lie the purple color wasn’t exactly what I had envisioned, but I still loved how they came out.

Photo Credit: Sara without an H

The programs came with little holes in the bottom.  I purchases sparkly white ribbon (from Michael’s) to put through the hole.  My mom and dad spent a couple hours cutting the ribbon to size and putting them on the programs the Friday before the wedding.  Nothing like me waiting until the last minute! :)

So my advice to you – please order wedding programs at least a month or two before the wedding.  AND know your limits. DIY is awesome and all, however if you don’t your limit you will over extend yourself (and loved ones) instead of enjoying the projects they will end up stress you out.  I’m glad my husband knew where the line was for me. =)

Happy wedding planning!

Don’t forget to leave your tidbit by commenting below :)

Share

We had received a few wedding and other party invitations with super pretty writing on the envelopes.  Specifically gorgeous calligraphy!  Despite loving calligraphy I couldn’t justify the cost of paying for hand done calligraphy on something 99.9% of people just throw away after opening the invitation.

So we went the route of DIY calligraphy.  By DIY I mean using the computer and printer, because my handwriting is less than ideal even for meeting notes. :)

Materials Needed:

First the husband and I went online and viewed a ton of different free calligraphy fonts.  After much deliberation we downloaded a free calligraphy font

We had a little over 100 invitation to address.  The envelopes we chose came in packs of 50, 250 and 500.  Clearly the 500 was over doing it, but we couldn’t decide if we should order 150 (3 packs of 50) or just go for the 250 pack of envelopes.  In the end we decided we could find other uses for the extra envelopes and went ahead and purchased 250 envelopes.

How to Create Envelopes in MS Word:

  1. Open MS Word
  2. Click Page Layout > Size > More Paper Sizes
  3. From the Paper Size drop down choose Custom Size
  4. For me I had A7 envelopes (5-1/4” x 7-1/4”)
  5. So within the width I entered 7.25 and height 5.25
  6. Click OK

DIY Calligraphy / Wedding Envelopes | Life's Tidbits

For the return address I decided to use a standard “block” font called “Adobe Caslon Pro”.  I have only received one invitation where the return address was calligraphy font, but I think this is all a matter of preference.  And since it’s DIY you can make it fit your style and font preference.

  • Type in a test address > select font, size and line spacing

Ours looked like this …

DIY Calligraphy / Wedding Envelopes | Life's Tidbits

  • Save the file someplace on your computer and clearly mark it as the return address portion of the envelope.
  • Once you are happy with how it looks print a TEST version.  I suggest plain white paper.
  • Once you are happy with how it looks go ahead and print a test version on an envelope.
  • Confirm everything looks perfect and make tweaks as necessary. Ensure you’ve spell checked as well.

At this point you can go ahead and print return addresses on all your envelopes.  If you have 130 invitations to send make an extra 10-15 envelopes with return addresses.  This will save you time if you have to reprint an address.  As you print them make sure the envelopes don’t fall on top of each other in the tray … it can cause smudging.  We lined our bookshelves with the envelopes and allowed them to dry over night before putting them in a pile.  Our apartment looked like a little printing press! :)

With the return address completed you are ready to start on the front of the envelope.  The steps are the same as above.

  • Type in a test address > select font, size and line spacing
  • Print tests on plain paper and then an envelope.
  • I think it took us at least 5-7 printed drafts to be happy.
  • Once you are happy go ahead and add all the addresses into the word file (click save periodically to ensure you don’t loose your work people!!).

Here’s what ours looked like in Word:

DIY Calligraphy / Wedding Envelopes | Life's Tidbits

A Couple Tips:

  1. Print High resolution.  I printed the 1st few on standard.  They looked nice, but when the husband suggested printing on High resolution it looked better.  This does use a little more in than standard, but in the grand scheme of things I don’t think it really cost us any additional money.
  2. Buy extra envelopes.  As I already mentioned print tests on regular white paper for a while until you think it is right.  You will need envelopes for testing, but you will also find that people move or you have an address incorrect and have to reprint.  Extra envelopes purchased up front save you heartburn later, promise!
  3. Start early.  Everyone laughed when I started printing envelopes 3 months before we sent them.  Giving myself a lot of time to complete the project reduced my stress level and made it more fun. Plus it ensured I gave the envelopes plenty of time to dry before additional printing or sending.  Nothing was smudged because we were rushing.

Here they are ready to be sent!  Oh how I still love those custom stamps.

DIY Calligraphy / Wedding Envelopes | Life's Tidbits

Good luck with your printing press!  If you have any questions about the process, please leave a comment … I’m happy to provide additional details!!

Happy Planning and DIY!!

signiture_nicole

 

Related Posts Plugin for WordPress, Blogger...
Share